Engineering case

All raw materials are imported from Japan SUS314, heat-resistant 1250 ℃, strong anti-oxidation and anti-carburizing.

How to deal with the common problems of the Great Wall mesh belt?

Release time:

2022-03-16


Great WallMesh beltHow to deal with common problems during operation?

In case of abnormal noise, electrification of the shell, tripping of the switch, serious heating of the motor and failure to start, the motor shall be shut down immediately for inspection. In order to ensure safety, the Great Wall mesh belt shall not be maintained during work. After maintenance, a trial operation of about five minutes should be carried out, and the machine should be turned on after confirming that there is no abnormality. According to the application environment conditions, the bearing grease is not regularly supplemented or replaced. In order to ensure the good flatness of the Great Wall mesh belt in the working process, the number of oil injection shall not be less than 1000 hours/time. Close the bearing and the motor bearing and fill 2/3 of the inner and outer rings of the bearing with zl-3 lithium-based smooth grease. Oil-free work is strictly prohibited.

The above contents are providedMesh beltFactory finishing release, reprint please indicate!