Engineering case

All raw materials are imported from Japan SUS314, heat-resistant 1250 ℃, strong anti-oxidation and anti-carburizing.

Can you tell me the working principle and scope of stainless steel mesh belt?

Release time:

2021-11-10


   Please stainless steel.Mesh beltWhat are the operating principles and scope of use?

After participating in the regular workpiece on the equipment mesh belt, the machine starts and the workpiece is driven. At the same time, the projectile ejected by the shot blasting device at high speed forms a fan-shaped beam, which evenly hits the surface of the workpiece, and then achieves the purpose of cleaning. The thrown projectiles and sand particles flow from the small holes on the mesh belt into the screw conveyor at the bottom, and are sent to the progress machine through the screw conveyor, and then separated by the progress machine into the separator.
  
The dusty gas is sucked into the dust collector by the fan, and after filtering, it becomes clean air and is discharged into the atmosphere. The dust falls into the dust box at the bottom of the dust collector through back blowing, and the user can remove it regularly. The waste sand flows out of the waste pipe and can be reused by the user. The pellet sand mixture is recycled from the recycling pipe into the cavity, separated by the separator and reused.
  
Scope of application: Mesh belts are commonly used in industry and manufacturing. Mainly used for drying, cleaning and cleaning of machinery parts in the food industry. The maintenance method of the mesh belt: If the mesh belt has a deviation phenomenon, adjust the tension shaft at one end of the driven shaft, and gradually adjust it. Remember to adjust quickly to form scratches on the edge of the mesh belt.
  
If the mesh belt vibrates, check whether the carrier and idler in the conveying channel are rusty and do not rotate, and adjust them one by one. If the chain drive mesh belt has chain jump and unstable operation, check whether the sprockets at both ends of the driving shaft are synchronized and whether the tooth end is worn too much.

The above contents are providedMesh beltFactory finishing release, reprint please indicate!