Engineering case

All raw materials are imported from Japan SUS314, heat-resistant 1250 ℃, strong anti-oxidation and anti-carburizing.

Stainless steel mesh belt operation method

Release time:

2021-06-21


Stainless SteelMesh beltmethods of operation have those?

1. When installed correctly, the output shaft of the belt conveyor and the input shaft of the gear box must be kept parallel, and the position of the belt conveyor on the sound card frame can be adjusted.
  
2. The tightness should be suitable for immediately adjusting the tightness of the stainless steel mesh belt. If the stainless steel mesh belt is too loose, it will cause deviation and cannot transmit the driving force well; if the stainless steel mesh belt is too tight, it will increase the output power consumption of the car engine and damage the stainless steel mesh belt in the initial stage. In order to use the stainless steel mesh belt more effectively, we have a practical stipulation on the tightness of the stainless steel mesh belt, that is, it is more appropriate to massage the center of the stainless steel mesh belt vertically to 20mm with four fingers.
  
3. When disassembling the stainless steel mesh belt correctly, some people not only have a poor method of prying the stainless steel mesh belt, but also use special tools that are not safe. For example, special tools with sharp edges or sharp edges can scratch or scratch the stainless steel mesh belt. In this way, when the stainless steel mesh belt works at high speed, the crack will gradually expand and crack.
  
4. Removal and replacement should be effective. Some people in the choice of stainless steel mesh belt, do not pay attention to the model standard or standard type, and even a group of stainless steel mesh belt is staggered, or new and old. Therefore, the tension of the stainless steel mesh belt must be different and thus be broken. Therefore, when disassembling the stainless steel mesh belt, it must be disassembled and replaced together. No need to arbitrarily increase or decrease the stainless steel mesh belt. If the stainless steel mesh is used to bring the driving force, it will quickly break and reduce the car's engine utilization.
  
5. Avoid oil contamination and cold weather exposure of stainless steel mesh belt. It will not only damage the characteristics of its transmission system, expand the rolling, and reduce the speed of the transmission system. Therefore, in the use of stainless steel mesh belt to avoid oil stains or sludge, often remove the mud stains in the rubber cloth wheel groove, reduce exposure to the shade, so as to avoid brittle and moldy tape.

The above contents are providedMesh beltFactory finishing release, reprint please indicate!