Engineering case

All raw materials are imported from Japan SUS314, heat-resistant 1250 ℃, strong anti-oxidation and anti-carburizing.

How to deal with the error of the net belt correctly?

Release time:

2021-04-09


     Mesh beltHow to deal with the error correctly?

Observe the horizontal and vertical movement of the mesh belt barrel. If the net value of the mesh belt exceeds 3mm, it should be used in conjunction with slender industrial equipment to adjust the roller sleeves on both sides of the hole. The specific method is to tilt which side of the mesh belt, which side of the guide roller group is in the right direction of the conveyor belt, or the other side moves backward.
  
Two planning errors for the top of the query mesh header and the protective cover of the processing table. If the cause of the error exceeds mm, two plans should be adjusted in the same plan.
  
The adjustment method of the head roller is: if the mesh belt is away from the right side of the cylinder, the spherical bearing on the right side of the cylinder should move forward or the spherical bearing on the left side of the cylinder should move backward; if the conveyor belt is away from the left side of the cylinder, the spherical bearing on the left side of the cylinder should move forward or the spherical bearing on the right side should move backward. The adjustment direction of the tail roll is opposite to that of the head roll.
  
The direction of the raw material on the mesh belt. The raw material does not have the heart of the belt section processing plan, which will form the belt direction deviation. The raw material is on the right, the conveyor belt is on the left, and vice versa. It is assumed that the raw material should be centered vertically. Helps to reduce or prevent this mesh belt error, can improve the baffle to change the direction of the material.

The above contents are providedMesh beltFactory finishing release, reprint please indicate!